• API 682 4th Edition

UFL650-Ta Dual Seal

  • API 682 Category 2 and 3, Type C, Arrangement 2 & 3 seal
  • Dual seal in face-to-back configuration
  • Balanced design
  • Independent of direction of rotation
  • Cartridge construction
  • For plain shafts
  • Stationary metal bellows design
  • Shrink fitted seal rings and solid mating rings

Details

  • 1.1.1,2.1.1

    Seal ring with Bellows Unit

  • 1.1.2,2.1.2,2.3,9,10

    Gasket

  • 1.1.3,2.1.3,7,17,19

    Hexagonal screw

  • 1.2,2.2

    Mating ring

  • 1.3,12

    Sealing ring

  • 3

    Shaft sleeve

  • 4

    Seat carrier

  • 5,14,16

    Set screw

  • 6,20

    HSH cap screw

  • 8

    Intermediate gland

  • 11

    Gland

  • 13

    Set ring

  • 15

    Pusher ring

  • 18

    Setting plate

  • F

    Flush

  • LBI

    Liquid Buffer / Barrier IN

  • LBO

    Liquid Buffer / Barrier OUT

  • Suitable for high and low temperature application
  • Compact design
  • No dynamically loaded O-ring which reduces chances of seal face hang hang-up
  • Pumping screw for media with higher viscosity also available
  • Short installation length possible
  • Rugged design for long operating life
  • Bellows design efficiently ensure self-cleaning
  • Bellows design minimizes variation in face load due to shaft expansion or face wear
  • Resistant to abrasive particles in the medium, no shaft or sleeve fretting
  • Refining technology
  • Oil and gas industry
  • Petrochemical industry
  • Chemical industry
  • Power plant technology
  • LPG plants
  • API 610/ISO 13709 pumps
  • Process pumps
  • Seal rings: Blister resistant carbon, Silicon carbide SSiC (Q1), RBSiC (Q2)
  • Mating rings: Silicon carbide SSiC (Q1), RBSiC (Q2)
  • Bellows: Inconel ® 718 (M6)
  • Secondary seals: Graphite (G)
  • Metal parts: CrNiMo steel 316 (G), Carpenter ® 42 (T4)
  • Shaft diameter:
    d1 = 20 … 110 mm (0.79″ … 4.33″)
  • Pressure:
    p = vacuum…20 bar (..290 PSI)
  • Temperature:
    t = –130 °C … +400 °C (-202 °F … +752 °F)
  • Sliding velocity:
    vg … 50m/s (…164 ft/s)
  • Recommended piping plans 2CW-CW
    Process side:
    01, 02, 03, 11, 12, 13, 14, 21, 22, 23, 31, 32, 41
    Between Seals: 52, 55
    Atmospheric side*: 61, 62, 65A, 65B
    *Throttle bushing on request
  • Recommended piping plans 3CW-FB
    Process side:
    01, 02, 03, 11, 12, 13, 14, 21, 22, 23, 31, 32, 41
    Between Seals: 53A, 53B, 53C, 54 Atmospheric side*: 61, 62, 65A, 65B
    *Throttle bushing on request

Other products