• Split Seals

ADKS

  • Designed to accommodate axial shaft movement
  • Capable of running dry
  • Radially cut multi-part seal rings
  • Shaft free of sealing components which minimizes the shaft vibrations
  • Seal rings are self adjusting
  • Shaft movement is accommodated by seal rings
  • Minimal power consumption as seal rings are non-contacting
  • Design of the seal housing is split
  • Low leakage due to extremely reduced gap during operation

Download PDF

Details

  • 1

    Flat seal

  • 2

    Housing, 2-piece

  • 3

    Seal ring

  • 4

    Tension spring

  • 5

    Detent

  • Ease of installation during assembly due to split design (dismantling of shaft is not necessary)
  • Operational durability
  • Easy to maintain
  • Trouble free replacement due to segmented seal ring design
  • Bearing seals (gear box, motors)
  • Chemical industry
  • Food processing industry
  • Fumes and exhaust,solids containing, flammable (ATEX), acid containing and toxic gases (Solids containing) steams / liquid mist Gases
  • Medium-sized and large fans / blowers
  • Metal production and processing
  • Mixers, agitators, mills, dryer
  • Oil mist / penetrating oil
  • Petrochemical industry
  • Power plant technology
  • Steam turbines
  • Waste incineration and removal industry
  • Water
  • Seal ring: Carbon, PTFE compound
  • Housing: 1.4021, 1.4571, Hastelloy®, Titanium,
  • Inconel®, others
  • Tension spring / detent: 1.4571, Hastelloy®,
  • Titanium, Inconel®
  • Shaft diameter: d = 40 … 340 mm (1.57″ … 13.39″)
  • Operating pressure: p = vacuum … 20 bar (290 PSI) abs.
  • Operating temperature: t = -120 °C … +800 °C (-184 °F … +1,472 °F) for carbon, max. 225 °C (437 °F) for PTFE compound
  • Speed = max. 150 m/s (492 ft/s) for carbon, max. 40 m/s (131 ft/s)for PTFE compound
  • Radial play: ±1.0 … 5.0 mm (±0.04″ … 0.2″)
  • Axial movement: theoretically unlimited
  • Recommended wear guard: >300 HB (low pressure), >58 HRC (high pressure)
  • FDA

Other products